gather-server/config.xml

<?xml version="1.0" encoding="UTF-8"?>

<config>
    <managerSetting>
        <enable>false</enable>
        <host>192.168.3.127</host>
        <beatPort>8050</beatPort>
        <serverUrl>http://127.0.0.1:9191</serverUrl>
    </managerSetting>
    <!--通道属性配置-->
    <channelSetting>
        <!--本机IP-->
        <ip>10.5.136.55</ip>
        <channelCode>DE2</channelCode>
        <channelName>货运进道2</channelName>
        <!--0 货运通道 1 行政通道-->
        <channelType>0</channelType>
        <!--车牌保存路径-->
        <fileRootPath>D:\\file</fileRootPath>
    </channelSetting>
    <!--设备相关设置-->
    <sysConfig>
        <caputreSetting>
            <enable>true</enable>
            <brand>6000</brand>
            <host>192.168.55.100</host>
            <port>8000</port>
            <username>admin</username>
            <pwd>ap123456</pwd>
        </caputreSetting>
        <serialSetting>
            <host>10.5.136.55</host>
            <weighbridge>
                <enable>false</enable>
                <port>4003</port>
                <brand>3000</brand>
                <minKg>1000</minKg>
            </weighbridge>
            <led>
                <enable>false</enable>
                <port>4002</port>
                <brand>2000</brand>
            </led>
            <electron>
                <enable>false</enable>
                <port>4002</port>
                <brand>2000</brand>
            </electron>
            <plc>
                <enable>false</enable>
                <port>4001</port>
                <!--输出-->
                <out>
                    <gatePoint>00</gatePoint>
                    <signalRedPoint>02</signalRedPoint>
                    <signalGreenPoint>03</signalGreenPoint>
                </out>
                <!--状态信号-->
                <status>
                    <!--上到位-->
                    <upPoint>0</upPoint>
                    <!--下到位-->
                    <downPoint>1</downPoint>
                    <!--雷达-->
                    <radarPoint>2</radarPoint>
                    <!--前红外-->
                    <fRedPoint>3</fRedPoint>
                    <!--后红外-->
                    <bRedPoint>4</bRedPoint>
                </status>
            </plc>
        </serialSetting>
    </sysConfig>
    <!--事件时序-->
    <eventList>
        <event>
            <name>WEIGHBRIDGE.READ</name>
            <!--动作格式 模块.命令-->
            <actionList>
                <action>CENTER.TIMER_SLEEP(1000)</action>
                <action>LED.LED_SHOW_CONTENT(04|即将称重，请停车)</action>
                <action>CENTER.TIMER_SLEEP(3000)</action>
                <action>WEIGHBRIDGE.START_READ</action>
                <action>CENTER.TIMER_SLEEP(5000)</action>
                <action>LED.LED_SHOW_CONTENT(${weight})</action>
                <action>CENTER.TIMER_SLEEP(500)</action>
                <action>LED.LED_SHOW_CONTENT(04|称重成功，后台验放通讯中)</action>
                <action>CENTER.SUBMIT</action>
            </actionList>
        </event>
        <event>
            <name>LED.READ</name>
            <actionList>
                <action>LED.LED_SHOW_CONTENT(红外初始化=======)</action>
                <action>CENTER.TIMER_SLEEP(10000)</action>
                <action>LED.LED_SHOW_CONTENT(欢迎使用红外)</action>
            </actionList>
        </event>
        <event>
            <!--识别到车牌-->
            <name>CAPTURE.CAPTURE_CAR_NO</name>
            <actionList>
                <action>LED.LED_SHOW_CONTENT(${platNo})</action>
                <action>PLC.RED_LIGHT_ON</action>
                <action>PLC.GREEN_LIGHT_OFF</action>
                <action>LED.LED_SHOW_CONTENT(04|请继续行驶)</action>
            </actionList>
        </event>
        <event>
            <!--通过校验，抬杆-->
            <name>PLC.RAILING_RISE</name>
            <actionList>
                <action>PLC.RAILING_RISE_ON</action>
                <action>CENTER.TIMER_SLEEP(100)</action>
                <action>PLC.RAILING_RISE_OFF</action>
            </actionList>
        </event>
        <event>
            <!--通过校验，继电器1断开闭合-->
            <name>PLC.UP_POINT_READ</name>
            <actionList>
                <action>PLC.RAILING_RISE_OFF</action>
            </actionList>
        </event>
        <event>
            <!--校验超时-->
            <name>PLC.SUBMIT_TIMEOUT</name>
            <actionList>
                <action>LED.LED_SHOW_CONTENT(04|提交数据请求失败，请联系管理人员)</action>
            </actionList>
        </event>
        <event>
            <!--行政车校验不放行-->
            <name>PLC.CHECK_ADMIN_FAILED</name>
            <actionList>
                <action>WEIGHBRIDGE.CLEAN</action>
                <action>CENTER.TIMER_SLEEP(2000)</action>
                <action>LED.LED_SHOW_CONTENT(04|请退出通道)</action>
                <action>CENTER.TIMER_SLEEP(8000)</action>
                <action>PLC.RED_LIGHT_OFF</action>
                <action>CENTER.TIMER_SLEEP(100)</action>
                <action>PLC.GREEN_LIGHT_ON</action>
                <action>PLC.RAILING_RISE_OFF</action>
                <action>LED.LED_SHOW_CONTENT(${platNo})</action>
                <action>LED.LED_SHOW_CONTENT(04|通道就绪,请通行)</action>
            </actionList>
        </event>

        <event>
            <!--通道重置-->
            <name>PLC.IDLE</name>
            <actionList>
                <action>WEIGHBRIDGE.CLEAN</action>
                <action>CENTER.TIMER_SLEEP(20)</action>
                <action>PLC.RED_LIGHT_OFF</action>
                <action>CENTER.TIMER_SLEEP(30)</action>
                <action>PLC.GREEN_LIGHT_ON</action>
                <action>PLC.RAILING_RISE_OFF</action>
                <action>LED.LED_SHOW_CONTENT(${channel})</action>
                <action>LED.LED_SHOW_CONTENT(${platNo})</action>
                <action>LED.LED_SHOW_CONTENT(${weight})</action>
                <action>LED.LED_SHOW_CONTENT(04|通道就绪,请通行)</action>
            </actionList>
        </event>
        <!--通道关闭-->
        <event>
            <name>PLC.SHUTDOWN</name>
            <actionList>
                <action>PLC.GREEN_LIGHT_OFF</action>
                <action>CENTER.TIMER_SLEEP(100)</action>
                <action>PLC.RED_LIGHT_ON</action>
                <action>LED.LED_SHOW_CONTENT(04|通道停止使用|01)</action>
            </actionList>
        </event>

        <event>
            <name>WEIGHBRIDGE.TIMEOUT</name>
            <actionList>
                <action>CENTER.TIMER_SLEEP(1000)</action>
                <action>LED.LED_SHOW_CONTENT(03|称重异常)</action>
                <action>LED.LED_SHOW_CONTENT(04|请退车并请联系管理人员)</action>
            </actionList>
        </event>
        <event>
            <name>WEIGHBRIDGE.POSITION_ERROR</name>
            <actionList>
                <action>LED.LED_SHOW_CONTENT(03|车辆位置异常或异常跟车)</action>
                <action>LED.LED_SHOW_CONTENT(04|请完全退出通道后再次进入通道)</action>
            </actionList>
        </event>
        <event>
            <name>CAPTURE.CAPTURE_FAILED</name>
            <actionList>
                <action>LED.LED_SHOW_CONTENT(02|车牌获取异常)</action>
                <action>LED.LED_SHOW_CONTENT(04|请退车并申请人工处理)</action>
            </actionList>
        </event>
        <event>
            <!--行政通道 识别到车牌-->
            <name>CAPTURE.CAPTURE_ADMIN</name>
            <actionList>
                <action>LED.LED_SHOW_CONTENT(${platNo})</action>
                <action>CENTER.TIMER_SLEEP(500)</action>
                <action>LED.LED_SHOW_CONTENT(04|后台验放通讯中)</action>
                <action>CENTER.SUBMIT</action>
            </actionList>
        </event>
    </eventList>
</config>